Shopping Cart
Price Match Guarantee

DJI Ronin-MX

Price Match Guarantee
Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set miss picking up motor noise.
The production of professional films for cinema requires rapid implementation and a substantial variety of  camera configurations. The Ronin-MX was designed to carry the many cameras used   daily in the cinema industry, and SmoothTrack algorithms are responsible for ensuring the fluidity  whatever the configuration chosen. Repositioned battery improves balance and stabilization is enhanced  by the presence of a cage for the camera allowing to secure it above and below.  The silent motors avoid disturbing sound recordings during filming.
  • Compatible with the M600
  • Supports RED EPIC, ARRI ALEXA and many more
  • Configuration in 5 minutes
  • 3 Operating Modes
  • Autotune Stability for Rapid Balancing

In the box:

x 1 Gimbal

x 1 Handle Bar

x 1 Remote Controller 2.4GHz

x 1 Tuning Stand

x 1 Charger

x 2 DJI Intelligent Battery

x 1 Cable Pack

x 1 Micro USB Cable

x 1 CAN Cable

x 1 Camera Mounting Plate

x 1 Cammer Upper Mounting Plate

x 1 Vibration Absorber

x 1 Accessories Package


Integrated functions

  1. Operating Modes · Suspended Mode
    · Vertical
    Briefcase Mode · Aerial Mode · Jib or Wirecam Mode
  2. Integrated independent IMU module
  3. DJI Special Motors for Nacelle with Encoders
  4. Bluetooth module
  5. USB connection
  6. 2.4GHz receiver
  7. Temperature sensors
  8. DJI 32-Bit DSP Advanced Processor
  9. Support D-Bus Receiver
Operating currentStatic: 300mA (@ 16V)
Dynamic: 600mA (@ 16V) Locked
motors: Max 10A (@ 16V)
Operating temperature-15 ° C ~ 50 ° C
WeightHandle included: 2.77kg
Vibration absorber included: 2.15kg
Platform dimensionsWithout handle:
280mm (W) x 370mm (D) x 340mm (H)
With handle:
560mm (W) x 370mm (D) x 440mm (H)
Camera support dimensionsMaximum depth from the center of gravity of the camera plate: 120 mm
Maximum height measured from the top of the camera plate: 130 mm
Maximum width: 160 mm
Accessory power portsRegulated 12V socket x 2; USB 500mW x 1; DJI Lightbridge x 1
GCU input power4S Ronin-M Battery
Connectivity2.4 GHz radio control; Bluetooth 4.0; USB 2.0
PC / MAC configuration required for the assistantWindows XP or later; Mac OS X 10.9 or later
Mobile configuration required for the assistantiOS 7.1 or later; Android 4.3 or later

Payload4.5 kg
Angular moment angle± 0.02 °
Maximum rotation control speedPan axis: 200 ° / s
Tilt axis: 100 ° / s
Roll axis: 30 ° / s
Mechanical amplitude
Pan axis control : continuous 360 ° rotation Tilt axis control. : + 270 ° to -150 °
Control of the roll axis: ± 110 °
Rotation control range
Pan axis control : continuous 360 ° rotation Tilt axis control. : + 45 ° to -135 °
Control of the roll axis: ± 25 °