Shopping Cart

Need a Hard Case for your Ronin M, Inspire 1 and Matrice?

06 October, 2016 | #News

There are a variety of Hard Cases you can purchase to make storing your drone a lot easier. 

 

 Type:

Features: Fits:
Go Professional - DJI 

Ronin M Hard Case

  • Water-jet precision cut. 
  • custom foam is housed in a Durable SKB military spec case used by military and industrial leaders. 
  • Industrial strength injection molded pull handle
  • Four wide set in-line skate style wheels for easy transport
  • Padlock holes include stainless steel padlock protector clips
  • Waterproof and dust tight design (MIL-C-4150J)
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down rubber over-molded cushion grip handle
  • Ambient pressure equalization valve (MIL-STD-648C)
  • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
  • Resistant to impact damage (MIL-STD-810F)

Upper Case Compartment:

Radio

Accessory

DSLR Camera

Removable Plug for Lens

DSLR Lens

Mounting Plate

7” or 10” Monitor

Battery

Removable Plug for Gimbal Adjustment

Ronin M

 

Lower Case Compartment:

Top Handle

Charger and Cables

Stand

Accessory

Go Professional - 

DJI Inspire 1 X5 Travel Mode

  • Water-jet precision cut. 
  • Custom foam is housed in a Durable SKB military spec case used by military and industrial leaders. 
  • Industrial strength injection molded pull handle
  • Four wide set in-line skate style wheels for easy transport
  • Padlock holes include stainless steel padlock protector clips
  • Waterproof and dust tight design (MIL-C-4150J)
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down rubber over-molded cushion grip handle
  • Ambient pressure equalization valve (MIL-STD-648C)
  • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
  • Resistant to impact damage (MIL-STD-810F)

1 x DJI Inspire 1 in Travel Mode

1 x X3, X5 Pro or X5 Raw Camera in Camera Box (Removable plug to accommodate either box)

5 x Batteries

Lens Cavity

2 x Monitors up to 10' (iPad air or iPad Mini)

2 x Radios

1 x Battery charging hub

1 x 180W Rapid Charge Power Adapter

1 x Accessory cavity

Spare props

Go Professional - 

DJI Inspire 1 X5 Landing Mode

  • Water-jet precision cut.
  • Custom foam is housed in a Durable SKB military spec case used by military and industrial leaders. 
  • Industrial strength injection molded pull handle
  • Four wide set in-line skate style wheels for easy transport
  • Padlock holes include stainless steel padlock protector clips
  • Waterproof and dust tight design (MIL-C-4150J)
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down rubber over-molded cushion grip handle
  • Ambient pressure equalization valve (MIL-STD-648C)
  • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
  • Resistant to impact damage (MIL-STD-810F)

1 DJI Inspire 1 in Landing Mode with X3, X5 Pro, or X5 Raw camera attached (X5 Pro and X5 Raw camera must face backwards)

1 x Camera Box (Removable plug to accommodate either box)

Lens Cavity

6 x Batteries

2 x Monitors up to 10' (iPad air or iPad Mini)

2 x Radios

1 x Battery charging hub

1 x 180W Rapid Charger Power Adapter

Spare props

3 x Accessory cavities

Go Professional - 

DJI Matrice 100 Hard Case

  • Water-jet precision cut. 
  • custom foam is housed in a Durable SKB military spec case used by military and industrial leaders. 
  • Industrial strength injection molded pull handle
  • Four wide set in-line skate style wheels for easy transport
  • Padlock holes include stainless steel padlock protector clips
  • Waterproof and dust tight design (MIL-C-4150J)
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down rubber over-molded cushion grip handle
  • Ambient pressure equalization valve (MIL-STD-648C)
  • Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
  • Resistant to impact damage (MIL-STD-810F)

Matrice 100 with gimbal (supported & stabilized with foam)

7 x Batteries

1 x 180w Charger

1 x Transmitter Radio

Spare Props

1 x Monitor up to 9.5 x 6 inches with sunshade, iPad Air or iPad Mini

1 x Charging Hub

3 x Accessory cavities

Go Professional - 

DJI Matrice 600 Hard Case

  • Water-jet precision cut with closed cell foam to resist water and dust infiltration.
  • Waterproof and dust tight design case design (MIL-C-4150J)
  • LLDPE Polyethylene impact resistant SKB case
  • UV, solvents, corrosion, fungus resistant (MIL-STD-810F)
  • Pressure relief / breather valves
  • Resistant to impact damage (MIL-STD-810F)
  • Stainless steel latches and hinges

Case Bottom:

Landing Gear

Ronin MX Battery

3rd 100W/180W Accessory Storage

Ronin Support

M600 Battery

 

Case Middle:

Accessory Cavity

M600 Battery

M600

 

Case Top:

100w Charger

Charger Cable Storage

Charging Hub

Follow Focus

iPad Mini Air

M600 Gimbal Controller

M600 Radio

M600

Removable Wheel Storage

Wireless Lens Control

Xbox Storage

Older Post Newer Post


Recent Posts

Mavic 2: Worth the wait

#News

Mavic 2: Worth the wait

DJI is recognised around the world as a leader in consumer, professional...
Drones: A tax deductible tool for the 21st century

#News

Drones: A tax deductible tool for the 21st century

Can drones help reduce your tax?  The ever-increasing use of drones in...
Sphere Drones sign exclusive partner agreement with global UAV leader - Delair

#News

Sphere Drones sign exclusive partner agreement with global UAV leader - Delair

Sphere Drones becomes one of Australia’s leading solution providers for commercial fixed-wing...